Cómo construir un cobertizo para el contenedor de basura: planos de bricolaje, dimensiones y materiales

Un recinto DIY para contenedores de basura puede ocultar cubos de basura poco atractivos, organizar la basura y el reciclaje, y evitar que los contenedores con ruedas rueden por un camino de entrada o patio.

La estructura básica puede parecer simple. La mayoría de los diseños utilizan un marco, paneles laterales y una o más puertas frontales.

La parte difícil es hacer que el recinto encaje correctamente.

Muchos recintos DIY para cubos de basura se miden solo alrededor del cuerpo de plástico del contenedor. El constructor olvida las ruedas, el asa trasera, la tapa abierta, el giro de la puerta y el espacio necesario para inclinar el contenedor hacia atrás.

El resultado puede verse bien pero volverse frustrante cada día de recolección.

Un recinto práctico para contenedores de basura debe proporcionar suficiente espacio para:

• Abrir cada tapa de contenedor
• Alcanzar las asas
• Inclinar cada contenedor sobre sus ruedas
• Retirar un contenedor sin mover los demás
• Abrir y cerrar las puertas del recinto
• Lavar el suelo y los paneles
• Permitir que el calor y la humedad escapen
• Aceptar un contenedor de reemplazo ligeramente diferente

Esta guía explica cómo construir un recinto para contenedores de basura para uno, dos o tres contenedores exteriores. Incluye fórmulas de medición, dimensiones de ejemplo, opciones de base, comparaciones de materiales, consejos para la construcción de puertas, ventilación, drenaje y errores comunes.

Los tamaños de ejemplo son solo ejemplos de planificación. Siempre mida los contenedores reales antes de cortar materiales o pedir un recinto personalizado.

¿Cómo se construye un recinto para contenedores de basura?

To build a trash bin enclosure, first measure the full width, depth, and open-lid height of every bin. Prepare a level, well-drained base, build a square frame, attach ventilated side panels, install strong front doors, and add a roof only when additional coverage is needed.

The complete process is:

1. Count and measure the bins.
2. Choose an installation location.
3. Prepare a level base.
4. Build or install the structural frame.
5. Attach the side and rear panels.
6. Build and hang the front doors.
7. Add a fixed roof or lift-up lid if required.
8. Install handles, hinges, latches, and anchors.
9. Test every bin through its full movement.

Do not start with a generic plan. Start with the bins and the way people will use them.

¿Qué debe planificar antes de construir un recinto para contenedores de basura?

The design should be based on the number of bins, available space, collection route, and required level of protection.

A simple three-sided privacy screen needs less planning than a fully covered cabinet with locks and hydraulic lids.

¿Cuántos contenedores necesita almacenar?

Count every container that will use the enclosure.

A property may have:

• One general waste bin
• One trash bin and one recycling bin
• Trash, recycling, and yard waste bins
• Different bin sizes for different waste streams
• Extra seasonal or commercial waste containers

Consider whether another bin may be added later.

Building a double-bin enclosure that has no room for a future yard-waste bin may lead to another construction project within a few years.

For multiple bins, decide whether the enclosure should have:

• One wide front door
• Two large doors
• One door for each bin
• Removable internal dividers
• One shared top lid
• Separate top lids

Individual doors usually make a two- or three-bin trash enclosure easier to use. One bin can be removed while the others remain secured.

¿Dónde se instalará el recinto?

Common locations include:

• Beside the house
• Along a driveway
• Near the garage
• Against a fence
• Behind a commercial building
• Near a shared collection area

Inspect the area before choosing the layout.

Check for:

• Utility meters
• Drainpipes
• Outdoor faucets
• Air-conditioning units
• Puertas
• Windows
• Walkways
• Vehicle doors
• Property boundaries
• Uneven or sloping ground

Do not block equipment that requires airflow, inspection, or maintenance access.

¿Cómo llegarán los contenedores a la acera?

Plan the complete route from the enclosure to the collection point.

The route should not require users to:

• Lift a heavy bin over a step
• Turn through a very narrow gate
• Pull the bin across soft soil
• Move a parked vehicle
• Remove every bin to reach one container
• Hold a large enclosure door open in strong wind

Open the proposed door area and practice moving the bins before construction begins.

¿Necesita puertas frontales?

An open-front enclosure is easier and less expensive to build.

Front doors provide better visual coverage and can help keep bins inside the structure.

Doors are useful when:

• The bins face the street.
• The site is exposed to wind.
• The ground has a slight slope.
• Animals enter the storage area.
• The enclosure needs a latch or lock.
• Several people use the bins.
• The project is for an apartment, office, or school.

Doors add weight and repeated movement to the structure. The posts, frame, hinges, and base must be strong enough to support them.

¿El recinto necesita un techo?

A trash bin enclosure does not always need a roof.

An open-top design is easier to build and naturally ventilated. It is often enough when the main goal is to hide the bin body.

A roof or lift-up top is helpful when you need:

• Complete visual coverage
• More protection from rain and direct sun
• Better control against animal access
• A cabinet-style appearance
• A top lid that opens with the garbage can lid

A covered enclosure must account for two separate movements:

1. The enclosure lid
2. The garbage can lid

These parts must open without hitting each other.

¿Debe anclarse el recinto?

Anchoring is recommended for:

• Tall privacy screens
• Lightweight vinyl panels
• Large front doors
• Covered enclosures
• Exposed driveways
• Coastal and high-wind areas
• Metal enclosures
• Commercial installations

Possible fixing methods include:

• Posts set in concrete
• Concrete expansion anchors
• Ground screws
• Ground spikes
• Paver anchors
• Wall brackets
• A weighted structural base

A lightweight no-dig screen may work in a protected residential yard. It is not always suitable for a heavy gate or an exposed site.

Cómo medir los cubos de basura para un recinto

Do not use gallon capacity as the only measurement.

Two 96-gallon trash cans can have different wheels, handles, body shapes, lid heights, and overall depth.

Measure every bin individually.

Mida el punto más ancho

Measure across the widest part of the complete bin.

Include:

• Wheels
• Axle ends
• Side handles
• Lid edges
• Raised side sections

The wheels are often wider than the plastic body.

Record the width of every trash and recycling bin.

Mida la profundidad total

Measure from the front edge to the farthest point at the back.

Include:

• Rear handle
• Wheels
• Lid hinge
• Raised rear sections

Then tilt the bin backward as though you are preparing to roll it.

The bin may require more depth while tilting than while standing upright.

Mida la altura cerrada

Measure from the ground to the highest point with the lid closed.

For an open-top enclosure, the side panels are often slightly higher than the closed bin.

For a covered enclosure, the closed height is not enough. You also need the open-lid measurement.

Mida la tapa a través de todo su recorrido

Slowly open the bin lid and measure the highest point it reaches.

Record:

1. Height with the lid closed
2. Height with the lid fully open
3. Highest point during movement
4. Rear clearance around the hinge
5. Space needed for your hand

The highest point may occur before the lid is fully open.

This is one of the most common measurement errors in DIY trash can enclosure plans.

Pruebe la ruta de extracción

Place the bins in the proposed storage area and test normal use.

Try to:

• Open each lid
• Pull one bin forward
• Tilt it onto the wheels
• Turn it toward the driveway
• Retirar un contenedor sin mover los demás
• Return it without hitting the frame

The movement test is often more useful than a tape measure alone.

Fórmula de tamaño del recinto para contenedores de basura

There is no universal finished size. Use the following formulas with your actual bin dimensions.

Ancho interno para un contenedor

Bin width

• left-side clearance
• right-side clearance

A practical starting allowance is:

• 2–3 inches on the left
• 2–3 inches on the right

Formula:

Internal width = bin width + 4–6 inches

Ancho interno para dos contenedores

Bin 1 width

• Bin 2 width
• clearance between the bins
• clearance along both outside walls

A practical starting allowance is:

• 2–4 inches between the bins
• 2–3 inches along each outer side

Formula:

Internal width = total bin width + 6–10 inches

Ancho interno para tres contenedores

Add:

• Width of all three bins
• Two internal gaps
• Two outside clearances

Formula:

Internal width = total bin width + 8–14 inches

The larger allowance is useful when the bins have wide wheels or are difficult to steer.

Profundidad interna

Use the deepest bin as the starting point.

Add:

• 2–4 inches behind the bin
• 3–6 inches in front of the bin

Formula:

Internal depth = deepest bin depth + 5–10 inches

Increase the depth when the bin needs to tilt significantly before rolling.

Altura interna para un recinto sin techo

Formula:

Internal height = closed-bin height + 2–4 inches

This normally hides most of the bin while keeping the lid easy to reach.

Altura interna para un recinto con techo

Formula:

Internal height = highest moving lid point + 2–4 inches

Also account for:

• Roof framing
• Bisagras
• Hydraulic supports
• Hand clearance
• Drainage slope

Dimensiones de ejemplo de un recinto para contenedores de basura

The following table uses example bins measuring 28 inches wide, 34 inches deep, and 45 inches high.

These are not standard dimensions for every municipal bin.

These are clear internal dimensions.

The exterior enclosure will be larger after adding:

• Posts
• Structural frames
• Panel thickness
• Door frames
• Bisagras
• Roof overhang

¿Qué tamaño de recinto necesita para un cubo de basura de 96 galones?

A 95- or 96-gallon trash can enclosure must be based on the specific bin model.

Do not assume all 96-gallon bins are identical.

Measure:

• Maximum width across the wheels
• Maximum depth including the handle
• Closed height
• Open-lid height
• Tilted movement depth

For one large bin, the internal enclosure may need approximately 4–6 inches of additional width and 5–10 inches of additional depth beyond the actual container.

For two 96-gallon bins, add the full width of both bins plus the internal and side clearances.

The door opening should be wider than the bin because large bins rarely roll out in a perfectly straight line.

Espacio libre recomendado alrededor de los contenedores de basura

These are starting points.

Provide more clearance when:

• The bins are very heavy.
• The users have limited mobility.
• The access route is not straight.
• The ground is slightly uneven.
• Several people use the enclosure.
• Replacement bin sizes may change.

¿Cuál es la mejor base para un recinto para contenedores de basura?

The base controls drainage, stability, door alignment, and how easily the bins roll.

Losa de concreto

Concrete provides a stable and washable surface.

It is suitable for:

• Heavy enclosures
• Bolted metal frames
• Frequent cleaning
• Propiedades comerciales
• High-use waste areas

The slab should slope slightly away from the building.

Do not create a low point where dirty water collects beneath the bins.

Base de adoquines

Pavers are a practical residential option.

A typical installation may use:

1. Excavated soil
2. Compacted aggregate
3. Leveling sand
4. Pavers
5. Joint sand

Make sure the pavers are level and fully supported.

Loose or uneven pavers can cause:

• Doors to drag
• Frames to twist
• Bin wheels to catch
• Water to collect

Base de grava compactada

Gravel works well where drainage is important.

A basic gravel base may include:

• Landscape edging
• Geotextile fabric
• Compacted crushed stone
• A finer compacted top layer

Avoid large, loose stones beneath the bin wheels. Heavy containers may become difficult to move.

Compacted gravel is more practical than decorative loose gravel for the main rolling path.

Piso de madera elevado

A raised wooden base can support a cabinet-style enclosure.

However, it creates a threshold.

Add a ramp if the bin wheels must move onto the raised floor.

Use pressure-treated wood for parts close to the ground and provide airflow beneath the floor.

Mejores materiales para un recinto DIY para contenedores de basura

The right material depends on appearance, weather, maintenance, structural requirements, and available tools.

Madera tratada a presión

Pressure-treated lumber is commonly used for:

• Posts
• Floor frames
• Door frames
• Structural rails

Use exterior-rated fasteners that are compatible with treated wood.

Allow for natural movement. Boards may shrink or twist after installation.

Cedro

Cedar is popular for visible slats and decorative screens.

It can be:

• Stained
• Sealed
• Painted
• Left to weather naturally

Keep the lower boards away from standing water.

Even naturally durable wood lasts longer when it can dry after rain.

Madera contrachapada para exteriores

Exterior plywood can be used for solid doors, roofs, and cabinet walls.

Seal:

• Front face
• Rear face
• All cut edges
• Screw holes
• Corners

Solid plywood provides strong visual coverage but may trap heat and moisture. Add vents or slatted sections.

Paneles de vinilo

Vinyl works well for quick visual screening.

It is easy to clean and does not require routine staining.

Verifica:

• Panel thickness
• Post strength
• Ground fixing system
• Wind exposure
• Temperature resistance
• Whether a front gate can be supported

A lightweight vinyl screen should not automatically be treated as a structural enclosure.

Tableros compuestos

Composite boards can provide a clean, wood-like appearance.

They may require:

• A metal or treated-wood frame
• Closer support spacing
• Correct expansion gaps
• Manufacturer-approved fasteners

Composite material is often heavier than expected.

Metal galvanizado o con recubrimiento en polvo

Metal is useful when the enclosure needs:

• Strong front doors
• Narrow but rigid frames
• Cerraduras
• Tamaños personalizados
• Perforated ventilation
• Hydraulic top lids
• Frequent commercial use

A metal enclosure is usually less practical as a basic DIY woodworking project.

Professional fabrication may be more suitable when precise doors, heavy lids, or long-term structural stability are important.

Herramientas y materiales para un cerramiento de madera

Herramientas comunes

• Tape measure
• Pencil
• Level
• Framing square
• Circular saw or miter saw
• Drill and driver
• Clamps
• Shovel
• Rake
• Tamper
• Post-hole digger
• Safety glasses
• Hearing protection
• Dust mask

Materiales comunes

• Pressure-treated posts
• Structural framing lumber
• Cedar, treated, or composite slats
• Exterior-rated screws
• Exterior hinges
• Handles
• Gate latches
• Barrel bolts
• Concrete, pavers, or compacted gravel
• Exterior paint, stain, or sealer
• Anchors
• Optional roofing material
• Optional hydraulic lid supports

Cómo construir un cerramiento para contenedores de basura paso a paso

The following method is suitable for a typical slatted wooden enclosure with front doors.

Adjust the design for the soil, climate, bin size, and local requirements.

Paso 1: Preparar el área de instalación

Mark the full enclosure footprint.

Make the base slightly larger than the finished structure.

Eliminar:

• Césped
• Roots
• Loose soil
• Escombros
• High spots

Install the selected base and check it in several directions with a level.

A small planned slope for drainage is acceptable. The enclosure frame itself must remain square.

Paso 2: Marcar los postes y la abertura de la puerta

Use stakes and string to mark the corners.

Measure the two diagonals.

When the diagonal measurements are equal, the layout is square.

Mark:

• Rear posts
• Front posts
• Door openings
• Internal divider positions
• Wall clearance
• Door swing
• Bin removal route

Place the bins inside the marked area before installing the posts.

Paso 3: Instalar los postes o construir el marco

For a fence-style structure, install posts in concrete or use suitable surface brackets.

For a cabinet-style design, build the side frames on a flat surface and connect them with front and rear rails.

Use temporary braces while checking:

• Level
• Plumb
• Square
• Door opening width
• Roof slope

Do not install decorative panels until the main frame is stable.

Paso 4: Fijar los paneles laterales y traseros

Install slats, boards, lattice, or composite panels.

For slatted walls:

• Use a spacer for consistent gaps.
• Keep each row level.
• Leave enough airflow.
• Use exterior fasteners.
• Avoid very large openings.

Finishing the boards before installation can make painting or staining easier.

Nota práctica de diseño

Narrow, consistent gaps usually provide better visual coverage than a few large gaps.

The ideal gap depends on:

• Viewing angle
• Panel thickness
• Desired ventilation
• Animal-control requirements

Paso 5: Construir las puertas frontales

Build the doors on a flat surface.

A basic rectangular wooden door may sag. Use:

• A rigid perimeter frame
• Diagonal bracing
• Strong corner joints
• Suitable exterior hinges

The brace should transfer the weight of the unsupported upper corner toward the lower hinge side.

Leave a small and even gap around each door for seasonal movement.

Paso 6: Instalar bisagras, manijas y pestillos

Use temporary blocks to hold each door at the correct height.

Install:

• Exterior hinges
• Handles
• Door stops
• Barrel bolts
• Gate latches
• Ground bolts
• Padlock-compatible hardware if needed

Test the door several times before adding more weight.

The latch should be easy to operate while the user is holding or moving a bin.

Paso 7: Añadir un techo o tapa elevable

A fixed roof should include:

• A drainage slope
• An overhang
• Waterproof covering
• Secure wind-resistant attachment
• Ventilation below the roof

Direct water away from the building and front doors.

For a lift-up top, check:

• Lid weight
• Hinge strength
• Opening angle
• Hand clearance
• Interaction with the garbage can lids
• Support hardware

A large solid top can become heavy.

Hydraulic struts may assist opening, but they must match the lid weight, length, hinge location, and required opening angle.

Nota de diseño del fabricante

Selecting a stronger hydraulic strut is not always safer.

An overpowered strut can make the lid difficult to close or place unnecessary force on the hinges and frame.

Paso 8: Anclar y terminar el cerramiento

Anchor the structure to the ground or wall using a method suitable for the site.

Apply outdoor finish to:

• Visible surfaces
• Hidden surfaces
• Cut ends
• Bordes de las puertas
• Roof edges
• Areas near the ground

Then complete a full-use test:

1. Open every enclosure door.
2. Open every garbage can lid.
3. Remove each bin separately.
4. Tilt the bins onto their wheels.
5. Close and latch the doors.
6. Wash the floor.
7. Check drainage.
8. Confirm that nothing hits a wall, fence, or vehicle.

Cuatro planos prácticos para cerramientos de contenedores de basura

Plano 1: Pantalla simple para un solo contenedor

Ideal para:

• One bin
• Protected side yards
• Visual coverage
• Beginner builders

Recommended structure:

• Two side frames
• One rear panel
• One front door or open front
• Open top
• Horizontal or vertical slats

Advantages:

• Less material
• Easy ventilation
• Simple cleaning
• No heavy top lid

Limitations:

• Limited weather protection
• The lid remains visible from above
• Wind anchoring may still be required

Plano 2: Cerramiento doble para basura y reciclaje

Ideal para:

• One trash bin
• One recycling bin
• Residential side yards
• Driveway storage

Recommended structure:

• One shared frame
• Two individual front doors
• Optional center divider
• Open or lift-up top
• Door latches

Separate doors make it easier to use one bin without opening the full enclosure.

Plano 3: Cerramiento para clasificación de residuos con tres contenedores

Ideal para:

• Trash, recycling, and yard waste
• Large homes
• Apartamentos
• Schools
• Offices

Recommended structure:

• Three individual doors
• Two internal dividers
• Strong upper rails
• Open top or separate lift-up lids
• Waste-stream labels

A very wide structure needs additional vertical supports to prevent bending.

Plano 4: Cerramiento estrecho para patio lateral

Ideal para:

• Narrow walkways
• One bin
• Bins stored front-to-back
• Limited door swing

Possible configurations include:

• One narrow front door
• Double folding doors
• A removable front panel
• An open-front privacy screen
• Bins arranged in a single row

Check how much walkway remains after the door opens.

¿Necesita ventilación un cerramiento para contenedores de basura?

Covered and mostly solid enclosures should include ventilation.

Ventilation can be provided through:

• Horizontal slats
• Vertical slats
• Perforated panels
• Louvers
• Gaps below the roof
• Protected lower openings

Airflow helps reduce:

• Trapped heat
• Condensación
• Humedad
• Odor concentration
• Slow drying after cleaning

Do not create openings large enough for animals to reach bags or bin lids easily.

¿Necesita drenaje un cerramiento para contenedores de basura?

The base should allow rainwater and cleaning water to leave the enclosure.

Good drainage may include:

• A surface sloping away from the building
• Open floor edges
• Compacted gravel
• Drainage gaps
• A sloped roof
• Easy cleaning access

Do not direct wastewater toward:

• A doorway
• A patio
• A neighboring property
• Building foundations
• Sensitive landscaping

Errores comunes en cerramientos DIY para contenedores de basura

Copiar dimensiones de internet

Online garbage can enclosure plans are based on specific bins and properties.

Use the design concept, but calculate your own dimensions.

Medir solo el cuerpo del contenedor

Include wheels, handles, hinges, lid edges, and movement.

Hacer la puerta demasiado estrecha

The opening should be wider than the bin because wheeled containers rarely move perfectly straight.

Olvidar la altura con la tapa abierta

A covered enclosure may fit a closed bin but prevent the lid from opening.

Usar marcos de puerta débiles

Wide wooden doors need strong frames and diagonal bracing.

Instalar sobre terreno irregular

A twisted frame causes door and latch problems.

Prepare the base first.

Permitir que la madera toque el suelo mojado

Keep vulnerable wood away from standing water and seal cut ends.

Bloquear toda la ventilación

A completely closed cabinet may trap heat, moisture, and odor.

Dirigir el agua del techo hacia la puerta

Slope the roof away from the user, building, and access path.

Usar herrajes para interiores

Use exterior-rated screws, hinges, handles, and latches.

No anclar los paneles grandes

Tall panels and doors can catch the wind.

Añadir puertas pesadas a estacas ligeras

A basic privacy-screen post system may not support a heavy gate.

Dificultar la limpieza

Leave enough room to reach the floor, corners, and rear wall.

DIY vs prefabricado vs cerramiento personalizado para contenedores de basura

¿Cuándo tiene sentido el DIY?

DIY is suitable when:

• You have one or two bins.
• The design is simple.
• The ground is easy to prepare.
• You own suitable tools.
• You accept future maintenance.
• No heavy lid or advanced locking system is required.

¿Cuándo es suficiente una pantalla prefabricada?

A ready-made screen may be enough when:

• Appearance is the main concern.
• Standard dimensions fit.
• The area is protected from extreme wind.
• A strong gate is not required.
• Fast installation matters.

¿Cuándo es mejor un cerramiento personalizado?

A custom enclosure may be better when:

• The bins are different sizes.
• The installation area is narrow or irregular.
• Individual doors are required.
• The enclosure needs locks.
• A heavy lift-up lid is required.
• Hydraulic supports are needed.
• The finish must match the property.
• The installation is commercial or shared.
• Standard products waste too much space.

Preguntas frecuentes

¿Cómo se construye un cerramiento para contenedores de basura?

Measure the bins, prepare a level base, build a square frame, attach ventilated panels, install strong doors, add a roof if needed, and anchor the structure.

¿Qué tamaño debe tener un cerramiento para contenedores de basura?

The internal dimensions should include the full bin width, depth, wheel size, handle projection, open-lid height, door movement, and cleaning clearance.

¿Cuánto espacio se debe dejar alrededor de un contenedor de basura?

A practical starting point is 2–3 inches along the outside walls, 2–4 inches between bins, 2–4 inches at the rear, and 3–6 inches at the front.

¿Qué ancho debe tener un cerramiento para dos contenedores?

Add the width of both bins, 2–4 inches between them, and 2–3 inches along each outer side.

¿Se puede construir un cerramiento para contenedores de basura de 96 galones?

Yes. Measure the specific bins because 95- and 96-gallon containers vary by manufacturer and local collection service.

¿Cuál es el mejor material para un cerramiento para contenedores de basura?

Wood is practical for DIY construction, vinyl works for simple screens, and powder-coated metal is suitable for strong doors, custom sizes, locks, and commercial applications.

¿Necesita techo un cerramiento para contenedores de basura?

No. Open-top enclosures provide good ventilation and easy access. Add a roof when complete coverage or additional weather protection is required.

¿Necesita ventilación un cerramiento para contenedores de basura?

Yes, if the structure is covered or mostly solid. Use slats, louvers, perforations, or protected openings.

Should a trash bin enclosure be anchored?

Anchoring is recommended for tall screens, lightweight panels, enclosures with doors, and exposed locations.

Is it cheaper to build or buy a trash can enclosure?

DIY may cost less for a simple wooden screen. Include tools, base preparation, hardware, finishing, labor, and future maintenance in the comparison.

Build Around the Bins, Not a Generic Plan

The best trash bin enclosure is designed around the actual containers and the way people use them.

Do not copy a plan simply because it says “single-bin,” “double-bin,” or “96-gallon.”

Measure:

• Wheels
• Handles
• Lid movement
• Pulling angle
• Door swing
• Collection route

Prepare a stable base, include drainage and ventilation, and make the door openings larger than the static bin dimensions.

A simple DIY screen can work well for one or two residential bins.

A larger enclosure with several doors, locks, a heavy roof, hydraulic supports, or frequent commercial use requires more careful structural planning.

When standard DIY plans do not fit the available space, a custom trash bin enclosure can be manufactured around the exact bin quantity, dimensions, door direction, finish, ventilation, and installation requirements.

Explore our custom trash bin enclosures for single-bin, double-bin, three-bin, residential, and commercial outdoor waste storage projects.

Productos populares de casilleros para paquetes y buzones

Elige entre los estilos de productos ya existentes o crea tu propia serie personalizada.

Cajas para paquetes pequeños

Cajas compactas para cartas, paquetes pequeños y espacios de instalación reducidos.

Cajas para paquetes medianas

Tamaño ideal para la recepción diaria de paquetes en entornos residenciales y de oficina.

Cajas grandes para paquetes

Mayor capacidad para paquetes, ideal para entregas frecuentes y una mayor demanda de recepción.

Cajas para paquetes extragrandes

Cajas para paquetes de gran capacidad, ideales para envíos de gran tamaño y lugares con mucho tráfico de entregas.

Recinto para contenedor de basura

Los recintos para contenedores de basura al aire libre ofrecen una forma limpia y segura de guardar uno, dos, tres o varios contenedores con ruedas. 

Buzones y cajas de correo

Los buzones están diseñados para que la recepción de correspondencia y paquetes pequeños sea más organizada, segura y cómoda.

Números de casa

Los números de las casas son detalles pequeños, pero influyen en la primera impresión que da una propiedad y en la visibilidad de la dirección.

Ranuras para correo

Las ranuras para correo están diseñadas para proyectos en los que la apariencia, el tamaño y los detalles de instalación son importantes.